Various

Reference: FTBOBJ1962-PREMIUM

BOB break out box EOBD (J1962)

1. Test OBD2 port before plug in scantool 2. Monitor voltage during reflash programming 3. Detect communication protocol and monitor data stream 4. Function as Break Out Box 5. Check Alternator condition 6. As data saver while replacing car battery7. As DC power source for other devices that need external power (up to 5 amps.) It is suitable to use on...

Reference: FTBOBJ1962-EXPERT

Terminal box socket J1962 (OBD) - Expert

Terminal box allowing to analyse all the signals available on the J1962 diagnostic socket (EOBD socket) of a vehicle while having the possibility to connect a diagnostic device.

Reference: FTBOBJ1962-BASIC

Terminal box socket J1962 (OBD) - Basic

Terminal box for analysing all the signals available at the J1962 diagnostic socket (EOBD socket) of a vehicle, with the possibility of connecting a diagnostic device. Basic model with : Simplified pin assignment with 3 colours (red, black, yellow) for power, ground and signals, compatible 12 and 24V (trucks), This is an "entry-level" model, but it...

Reference: FTYCAJ1962

Y cable EOBD (J1962)

Reference: FTYDSA1962

Data saver EOBD connector (J1962)

Reference: ATF6091

Professional sensor simulator and tester

Reference: FOXNT100

Foxwell NT100 Data logger

Tool allowing you to decrease your fuel consumption and increase vehicle performance by continuous engine data The data logger is an essential OBD tool helping to diagnose and analyze intermittent engine-related faults.

Reference: DAPN0090

DA-VINA J62 Replacement Cable

Reference: DAPN0093

Cable for DA-ST512 / JLR VCI J1962

Reference: FTCASF185

Cable for BMW ICOM A2 diagnostic tool

Reference: BGS60160

Terminal extraction tool

Reference: FTCAOBD12V

Multiple Use EOBD Cable

 Need to supply a diagnostic device from a battery ?- Fed up to see your diagnostic tool switching off meanwhile a diagnostic because you need to switch off and switch on the contact?