

ISC - Tronic - model 0128 - SE error code - locked system
Please contact us if this error message appears on your machine
Secure payment - Information protected
Fast delivery - 90% within 2 to 3 days
Returns within 14 days
Is your ISC Model 0128 air conditioning recharge station displaying the SE error message upon startup?
No need to worry. Simply perform the necessary maintenance (Service) to resolve the issue.
This procedure applies to machines manufactured by ISC and covers the following models:
To cancel this signal...
Error Code | Description | Solution |
---|---|---|
SE | Maximum time reached: Perform maintenance. | Perform the service maintenance (replace the pump oil and filter, check the system). Then reset the counter. |
no FL | Insufficient refrigerant amount. | Refill the internal tank (refer to chapter 5.8). |
HP | Overpressure in the internal tank. | Wait approximately 30 minutes, then reactivate the absorption/recycling function. If the issue persists, contact the service center. |
PM | Absolute maximum weight reached. | This value must not be exceeded under any circumstances. |
PL | Weight limit reached (programmable during the manual absorption/recycling phase). | Press the S button to continue. If the absolute maximum weight (PM) is reached, the absorption/recycling phase cannot proceed. Reduce the refrigerant amount in the internal tank. |
EE | Overpressure during the pressure check at the start of the system's vacuum phase. | It is not possible to proceed with the circuit vacuum phase if pressure is present. Perform an absorption/recycling phase. |
E1 | Maximum duration of the absorption/recycling phase reached. | Check the pressure values on the gauges. If pressure is present, the unit may be defective (contact the service center). If there is no pressure, it may indicate a leak in the A/C system or a leak in the oil drain valve (contact the service center). |
Reference: FTCS88903A
Brand: Air Conditioning Solution
Adapters/valves kit In this kit, you will find 2 pairs of HP and HP adapters, 3 shell references, a shell remover and several plugs for the air conditioning system. On most HP or LP pipes of the air conditioning systems fitted to cars, a removable OBUS seals the circuit. This tool kit contains two types of HP and BP adapters for volkswagen, Ford, GM,...
Reference: FTCSDOCPBOKSYS1
Looking for an internal compressor for your AC recovery machine?
Reference: FTCSAC140016B
This air conditioning circuit pump is used to purge air conditioning systems in order to remove humidity in the circuit. The vacuum pump can also be used to do vacuum packaging.
Reference: FTCS11178A
Brand: Air Conditioning Solution
Special oil for use in air conditioners R1234yf from manufacturers ND
Reference: CTR4018713
Brand: CTR SRL
Use this plug with an extractor to filter drier CTR Astra, Gaia, Artika (ref: CTR4018716).