Read & Clear Fault Codes
This application Reads all the DTCs from all the ECUs on the High Speed CAN bus, Low Speed CAN bus and MOST ECU connected via the diagnostic Gateway. DTCs can be & Clear cleared globally or ECUs individually.
SIR Service Reset
This application resets the service light and/or oil change reset depending on Interval Reset the vehicle. Note some vehicles have a manual procedure for this function.
EPBR Electronic Park Brake Release
Moves the electronic park brake to the mount position and then releases the Park Brake Release brake callipers.
J2534 - VCI Gateway mode
Once the JLR J2534 DLL files are loaded, this product will allow normal operation Gateway mode with JLR SDD Diagnostic software (subscription required). All protocol communication is possible with this device.
TTMT Tight Tolerance Mode Toggle
Toggles between tight tolerance mode and customer mode on the vehicle to Tolerance Mode allowing steering or chassis alignments.
DPFDR DPF Dynamic Regeneration
The DPFDR application allows the vehicles DPF dynamic regeneration process Dynamic to be undertaken to clear the DPF of soot build up.
DPFAR DPF Adaption Reset
The DPFAR application resets the DPF soot value enabling the DPF dynamic Adaption Reset regeneration to be performed or following the fitment of a new diesel particulate filter.
