

Your car's airbag indicator light on? This simulator is the ideal and essential tool to identify if the problem comes from the beam or the component.
Secure payment - Information protected
Fast delivery - 90% within 2 to 3 days
Returns within 14 days
Compatible with most SRS airbag systems, this small diagnostic tool will allow you to simulate the airbag or the seatbelt pretensioner of a car and to identify if the airbag fault indicator is lights up because of a problem in the harness or because of a problem with the component itself.
Note: this is a diagnostic tool that is PROVISIONALLY connected to a vehicle. Under no circumstances should consideration be given to permanently mounting it on a vehicle to extinguish an airbag warning light.
Reference: BGS8999
This kit is used to check the proper operation of vacuum-operated systems, such as manifold absolute pressure sensors (MAP), solenoid valves, pipes, variable geometry turbos, and EGR valves. Also suitable for the purging of brakes and hydraulic clutch systems.
Reference: FTCAPSA02W-1
Adapter cable for old vehicles (before 1993) from the PSA group (Peugeot Citroën). Note: the power cable to power up the diagnostic device and / or the interface is supplied (via the 2 alligator clips).
Reference: FTCAGENALIM
Generic power cable This cable is used to power the adapter cables for old Fiat, PSA (Peugeot Citroën) and Hyundai vehicles. It complements the following cables: - FTCASF190 - FTCAFIA3W - FTCAHYU12W.
Reference: FTCAFIA03W
Adapter cable for old Fiat vehicles. Caution: This cable is supplied without the power supply required to operate it. You can find it at this reference: FTCAGENALIM
Reference: FTBOBJ1962-EXPERT
Terminal box allowing to analyse all the signals available on the J1962 diagnostic socket (EOBD socket) of a vehicle while having the possibility to connect a diagnostic device.
Reference: FTCAOBD12V
Need to supply a diagnostic device from a battery ?- Fed up to see your diagnostic tool switching off meanwhile a diagnostic because you need to switch off and switch on the contact?
Reference: FTCABMWENTW
ENET Cable - BMW You have a BMW "F" Series. This model is perfect for you! Indeed, it has a RJ45 connection (present on all PCs) and a standard OBD socket. In addition, this 180 cm cable is compatible with software such as ISTA-D, rheingold, ISTA-P.
Reference: FOXNT100
Brand: Foxwell
Tool allowing you to decrease your fuel consumption and increase vehicle performance by continuous engine data The data logger is an essential OBD tool helping to diagnose and analyze intermittent engine-related faults.
Reference: FTCABT88W
Emergency OBD II power cable for car. In a few words, this cable makes it possible to keep the information of the dashboard (digital clock, acoustics, memory seats, ABS, anti-slip system or even the electric rearview mirror) and to avoid the loss of information in case of failure of the computer of the car.
Reference: FTBOBJ1962-PREMIUM
1. Test OBD2 port before plug in scantool 2. Monitor voltage during reflash programming 3. Detect communication protocol and monitor data stream 4. Function as Break Out Box 5. Check Alternator condition 6. As data saver while replacing car battery7. As DC power source for other devices that need external power (up to 5 amps.) It is suitable to use on...
Reference: FTCS7180A
AutoSim Pro Basic kit The AutoSim Pro kit is a signal generator for testing sensors, cables and connections when they installed. This allows an effective elimination of defects without having to replace the parts. The main strength of this device is its simple and intuitive operation via function keys. The screen continuously displays the most important...